Polycom 500D Installation Instructions And User Manual page 11

7. Place the SoundStation Premier
500D/550D on a flat, stable
surface in the center of the room.
If using the extended hypercardiod
microphones with the 550D, for the
best coverage, position as shown in the
examples to the right.
8. Press to hear a dial tone.
ON/OFF
The microphone status LEDs on the
top of the console will show a steady
9. Press again and while
ON/OFF
the phone is off adjust the ringer
volume on the SoundStation Premier
500D/550D by pressing SHIFT
then or
VOL VOL
. To program your phone number, press
10
then press the
SHIFT
Enter the phone number with area code,
using the key to enter a space.
*
When finished, press
To retrieve the phone number at any
time during a phone call, press
then press the
CONF
number will be displayed for 10
seconds, after which the display will
return to its previous mode. This display
will default to this number while the
conference phone is inactive.
You are now ready to use your
SoundStation Premier 500D/550D.
.
key.
CONF
again.
CONF
SHIFT
key. The phone
green when the system is on.
Press to terminate any
ON/OFF
conference call.
ON/OFF
There are four settings: OFF, LOW,
MID, and HIGH. The levels will be
heard after each key press and shown
on the display. After 5 seconds the
display will return to its previous mode.
RINGER VOL
VOL
THIS PHONE #
CONF
5