Human-Machine Interface And Button Operation - Jocel JSBS4PS011299 Instruction Manual

The top space pf the side by side
shall be greater than 30cm, and
the distances from both sides and
backside shall be more than
10cm to facilitate the opening and
closing and heat dissipation. Wipe
the refrigerator inside and outside
with warm moist rag ( add a small
amount of detergent in the warm
and wipe clean finally with clean
water).

Human-Machine Interface and Button Operation

Display screen
Keys
A. REF.TEMP
B. FRZ.TEMP
C. MODE
D. LOCK/UNLOCK
Display
For the first power-on, the full display lasts 3s while the start-up tone rings; then,
the panel displays normally (The setting temperature of refrigerating chamber,
variable temperature chamber and freezing chamber is 5 ºC, -18 ºC and -18ºC,
respectively, upon the first power-on).
Display of normal running
Display a fault code (loop display) when a failure occurs; display the setting
temperature of refrigerating chamber when no failure occurs;
The side by side shall stay for half an hour
before connecting 220-240V/50Hz power
when it is firstly started. The side by side
shall run 2 to 3 hours before loading fresh
or frozen foods; the side by side shall run
for more than 4 hours in summer in
advance considering that the ambient
temperature is high.
-9-