Jocel JSBS4PS011299 Instruction Manual page 11

Display control
In normal cases, the display screen will display LOCK without door opening and
key operations for 30s, and then die out after 30s under the locking state; when
the display screen is off, it will light up normally with key operations; when a
failure to the category of "Visible Fault Code", the display screen turns on and
then dies out after 30s;
Settings of freezing chamber
Temperature setting of freezing chamber
Press the key FRZ.TEMP to select the freezing temperature area and then press
the key FRZ.TEMP to adjust the temperature of freezing chamber; the
temperature drops 1 ºC for pressing the key FRZ.TEMP once; press the key
FRZ.TEMP again after the temperature reaches -24 ºC, the freezing chamber is
set to -16 ºC and the temperature setting varies between -24 ~ -16 ºC, which will
be effective upon locking.
Mode setting
Press the key "SUPER COOL" and "SUPER FRZ", the corresponding modes will
be circulated as below:
When the refrigerating chamber is on, cycle settings SUPER COOL→ SUPER
FRZ→SUPER COOL/SUPER FRZ→VACATION→NONE→SUPER COOL...
When the refrigerating chamber is off, cycle settings SUPER FRZ→VACATION
→NONE→SUPER FRZ...
Under the SUPER COOL mode, the refrigerating chamber defaults to 2 ºC
automatically; upon exiting the SUPER COOL mode, the setting temperature of
refrigerating chamber will restore to that before the SUPER COOL mode.
Under the SUPER FRZ mode, the freezing chamber defaults to -24 ºC
automatically; upon exiting the SUPER FRZ mode, the setting temperature of
freezing chamber will restore to that before the SUPER FRZ mode.
-10-