Chassis Leds - Cisco Nexus 36180YC-R Hardware Installation Manual

LEDs
•
•
•

Chassis LEDs

This table provides information about chassis LEDs for Cisco Nexus 3000 Series switches.
Component
Chassis (front and
back)
Chassis LEDs, page 35
Fan LEDs, page 36
Power Supply LEDs, page 36
LED
ID
Status (STS)
Port LED
A P P E N D I X
Status Description
On (blue) Identifies the chassis receiving the beacon signal.
Solid on All diagnostics pass. The module is operational.
(green)
Off The module is not receiving power.
On (amber) The module is booting or running diagnostics.
The switch is overheating. The temperature threshold
has been exceeded by a small value during
environmental monitoring.
Blinking The switch has overheated. The temperature threshold
(amber) has been exceeded by a large value during environmental
monitoring.
If the module fails during initial reset, the LED continues
to blink and the module does not come online.
The module has a runtime failure and is brought offline.
Customer Green and amber LED used to indicate customer-defined
defined status for each port.
states
Cisco Nexus 3600 Hardware Installation Guide
C
35