Table of Contents
Advertisement
LEDs
•
Switch Chassis LEDs, on page 47
•
Fan Module LEDs, on page 48
•
Power Supply LEDs, on page 48
Switch Chassis LEDs
The BCN, STS, and ENV, LEDs are located on the left side of the front of the switch. The port LEDs appear
as triangles pointing up or down to the nearest port.
LED
BCN
STS
ENV
(port)
Color
Status
Flashing blue
The operator has activated this LED to identify this switch in the chassis.
Off
This switch is not being identified.
The switch is operational.
Green
Flashing amber
The switch is booting up.
Amber
Temperature exceeds the minor alarm threshold.
Red
Temperature exceeds the major alarm threshold.
Off
The switch is not receiving power.
Green
Fans and power supply modules are operational.
Amber
At least one fan or power supply module is not operating.
Green
Port admin state is 'Enabled', SFP is present and the interface is connected (that is, cabled,
and the link is up).
Amber
Port admin state is 'Disabled, or the SFP is absent, or both.
Off
Port admin state is 'Enabled' and SFP is present, but interface is not connected.
Cisco Nexus 9364D-GX2A ACI-Mode Switch Hardware Installation Guide
C
A P P E N D I X
47
Advertisement
Table of Contents
