Checking And Accepting An Alarm; Current Alarms - Novatech 1732 Operator's Manual

6.1 Checking and Accepting an Alarm

Probe 2 TC Open/Ct
Time Activated
08 Mar 2006 03:45:29
Status
When a new alarm occurs, either a process alarm or an alarm that will appear in the common alarm list, the
Alarm Light will flash quickly. The more new alarms there are, the faster the light will flash.
To check the cause of the alarm –
1. Press the A
LARM
will flash.
2. The alarm screen will appear displaying the cause of the alarm on the top line.
3. Press the A
LARM
4. Press the O
PTION
active alarm.
5. When all the new alarms have been ACCEPTED the Alarm Light will stop flashing.
6. Accept each alarm and then press the S

6.1.1 Current Alarms

To view the alarms that are still current press the A
∆ and A ∇ buttons to view all alarms. Use the D
A
LARM LARM
Activated and the Time Accepted of each alarm.
Operators Manual
20
Active
∆ button. This will put the transmitter into the current alarm mode. The Setup Light
A button to accept the alarm.
CCEPT
∆ button to see the next active alarm or the O
Alarm Description
Time title:
Time Activated
Time Accepted
Time Cleared
Time of the event
Alarm Status:
Active
Accepted
Self Cleared
/ R button to return to the Run Mode
ETUP UN
∆ button from the Run Mode and then use the
LARM
∆ and D
ISPLAY
∇ button to see the previous
PTION
∇ buttons to view the Time
ISPLAY
1732 Oxygen Transmitter
February 2015