Oxygen Display - Novatech 1732 Operator's Manual

4.2 Oxygen Display

The oxygen measurement is displayed on the top line of the transmitter. It can be scaled in either % or ppm
(see chapter 5.3.3 Oxygen Display Units).
If "Oxygen %" is selected in Setup Menu #04 the transmitter will maintain the best resolution available. The
display will show oxygen in the following format –
Range
30.0% to 100.0%
1.00% to 29.99%
0.100% to 0.999%
< 0.100ppm
If "Oxygen ppm" is selected in Setup Menu #04 the transmitter will show the oxygen in ppm format between
10 and 9,999ppm.
Outside this range the oxygen will be shown in % format.
The show oxygen in the following format –
Range
>10,000ppm
1,000 to 9,999ppm
100 to 999.9ppm
10 to 99.99ppm
<10ppm
Operators Manual
10
Display format
###.# % ( 1 digit after the decimal )
##.## % ( 2 digits after the decimal )
0.### % ( 3 digits after the decimal )
scientific notation (#.## x 10
Display format
% format (see above)
#,### ppm
###.# ppm ( 1 digit after the decimal)
##.## ppm ( 2 digits after the decimal)
scientific notation (#.## x 10
- ##
% )
- ##
% )
February 2015
1732 Oxygen Transmitter