Information Screen - Novatech 1732 Operator's Manual

4.3.3 Information Screen

The 1732 Oxygen Transmitter has an information screen available to the user to allow more detailed
information about the running of the transmitter to be easily read by the user.
The information available is:
1. Model and version of the current firmware
2. The date/time that the firmware was compiled
3. The maximum temperature that the transmitter has measured inside the cabinet
4. Current date and time
5. The time of all the next timed events (Impedance test, cal/purge 1, cal/purge 2)
6. ADC calibration data (analogue input calibration)
7. DAC calibration data (analogue output calibration)
8. Probe temperature record (probe 1 and 2)
The information screen is accessed from the Run Mode by pressing and holding the A
and then pressing the S
scroll bar down the left hand side. The data can be scrolled through by using the D
buttons. The data is for reference only and cannot be changed.
February 2015
1732 Oxygen Transmitter
/ R button. The first data appears at the top of the screen and there is a
ETUP UN
A button
LARM CCEPT
∆ and D ∇
ISPLAY ISPLAY
Operators Manual
13