Table of Contents
Advertisement
The 1732 Oxygen Transmitter has a graphic display, 8 buttons and 5 LED indicators to show the stats of the
transmitter.
All of the buttons have multiple functions, depending on what is currently on the display. As a general
starting point, the larger white text on the button is the function while the transmitter is in the Run Mode and
the smaller black text on the button is the function in the Setup Menu.
When the transmitter is sitting idle it will revert to Run Mode, in which standard information relating to the
process appears on the screen. In order to configure the transmitter the operator must access Setup Menu.
This is achieved by pressing the S
S
button is pressed again or after a period of 60 seconds of inactivity.
ETUP
4.1 Run Mode Display
In Run Mode the 1732 shows the first oxygen probe measurement in large characters at the top of the
display and a user selectable lower line in smaller characters below. Other items on the display include the
activity heartbeat indicator in the top right corner, a row of single letter action indicators in the bottom left
corner and the current time in the bottom right corner.
Power Indicator
Probe 1 Oxygen
Lowerline secondary
process variable
February 2015
1732 Oxygen Transmitter
button. The transmitter will return back to the Run Mode when the
ETUP
The front panel of the 1732 Oxygen Transmitter
12.25%
Probe 1 Temp 720.3 C
B
4. D
ISPLAY AND
14:20:36
Activity Information Indicators:
B Burner input enabled (terminals 11&12)
A The transmitter is performing an automatic
ADC calibration.
T (flashing) One or more oxygen probes is
below operating temperature (650°C / 1200°F)
Z The transmitter is performing a probe
impedance check.
K
EYPAD
Heartbeat Indicator
Current time
Operators Manual
9
Advertisement
Table of Contents
