Handling The Consumable Products And Maintenance Parts - Epson AL-M320DN User Manual

AL-M320DN/AL-M310DN/AL-M220DN User's Guide
❏ Do not insert your hand deep into the fuser unit as
some components are sharp and may cause injury.
❏ Never push objects of any kind through cabinet
slots as they may touch dangerous voltage points or
short out parts that could result in a risk of fire or
electric shock.
❏ Do not sit or lean on the printer. Do not put heavy
objects on the printer.
❏ Do not use any kind of combustible gases in or
around the printer.
❏ Never force the printer's components into place.
Although the printer is designed to be sturdy, rough
handling can damage it.
❏ Do not leave jammed paper inside the printer. This
can cause the printer to overheat.
❏ Never spill liquid of any kind on the printer.
❏ Adjust only those controls that are covered by the
operating instructions. Improper adjustment of
other controls may result in damage and may
require repair by a qualified service representative.
❏ Do not turn off the printer:
-After turning on the printer, wait until Ready
appears on the LCD panel (AL-M320DN/
AL-M310DN), or the Ready light turns on
(AL-M220DN).
-While the Data light is on or flashing.
-While printing.
❏ Avoid touching the components inside the printer
unless instructed to do so in this guide.
❏ Follow all warnings and instructions marked on the
printer.
❏ Except as specifically explained in the printer's
documentation, do not attempt to service this
product yourself.
❏ Periodically disconnect the plug from the electrical
outlet and clean the blades.
❏ Do not disconnect the plug while the printer is on.
❏ If the printer will not be used for a long time,
disconnect the plug from the electrical outlet.
❏ Unplug this printer from the wall outlet before
cleaning.
Important Instructions
❏ Use a well-wrung cloth for cleaning and do not use
liquid or aerosol cleaners.
Handling the consumable
products and maintenance parts
❏ Do not burn used consumable products and
maintenance parts because they might explode and
injure someone. Dispose of them according to local
regulations.
❏ Be sure to keep consumable products and
maintenance parts out of the reach of children.
❏ When handling a toner cartridge, always place it on
a clean, smooth surface.
❏ Do not attempt to modify or take it apart
consumable products and maintenance parts.
❏ Do not touch the toner. Always keep toner away
from your eyes. If toner gets on your skin or clothes,
wash it off with soap and water immediately.
❏ If toner is spilled, use a broom and dustpan or a
damp cloth with soap and water to clean it up.
Because the fine particles can cause a fire or
explosion if they come into contact with a spark, do
not use a vacuum cleaner.
❏ Wait at least one hour before using a toner cartridge
or photoconductor after moving it from a cool to a
warm environment to prevent damage from
condensation.
❏ To get the best print quality, do not store the toner
cartridge in an area subject to direct sunlight, dust,
salty air, or corrosive gases (such as ammonia).
Avoid locations subject to extreme or rapid changes
in temperature or humidity.
❏ When removing the photoconductor unit, do not
expose it to sunlight at all and avoid exposing it to
room light for more than three minutes. The
photoconductor unit contains a light-sensitive
drum. Exposure to light can damage the drum,
causing dark or light areas to appear on the printed
page and reducing the service life of the drum. If you
need to keep the photoconductor unit out of the
printer for long periods, cover it with an opaque
cloth.
9