Technical Specifications - Tannoy VQ 100 Manual

VQ 100

TECHNICAL SPECIFICATIONS

System
System Type
Frequency Response (-3dB)
Frequency Range (-10dB)
Operating Modes
System Sensitivity (1W @1m)
Bi-Amp
LF (80Hz - 450Hz)
Passive MF/HF (450Hz - 23kHz)
Tri-Amp
LF (80Hz - 450Hz)
MF (450Hz - 7kHz)
HF (7kHz - 23kHz)
Dispersion (-6dB)
Driver Complement
LF
MF/HF
Crossover
Directivity Factor (Q)
Directivity Index (DI)
(2)
Rated Maximum SPL
Low Frequency
Mid Frequency
High Frequency
Passive MF/HF
(3)
Power Handling
LF @ 4 Ohms
MF @ 8 Ohms
HF @ 8 Ohms
Passive MF/HF @ 8 Ohms
Ordering Information
PART NUMBER MODEL NAME
8001 4820
Tannoy United Kingdom T: 00 44 (0) 1236 420199
Tannoy Deutschland T: 00 49 (180) 1111 881
Tannoy France T: 00 33 (0)1 7036 7473
TC|Group Americas T: 00 1 (519) 745 1158
Tannoy adopts a policy of continuous improvement and product specification is subject to change
3-Way Full Range - Point Source
(1)
115Hz - 23kHz
(1)
90Hz - 27kHz
Bi-Amp (LF,MF/HF)
User Configurable
Tri-Amp (LF, MF,HF)
User Configurable
(2)
105dB (2.0V @ 4 Ohms)
110dB (2.83V @ 8ohms)
105dB (2.0V @ 4 Ohms)
111dB (2.83V @ 8 Ohms)
110dB (2.83V @ 8 Ohms)
100 degrees conical
2 x 300mm (12.00") Low
Frequency Transducers, Semi
Horn Loaded
Dual Concentric™ Compression
driver loaded into a single
PSW™ Waveguide
Bi-amp 450Hz (active)
7kHz (passive)
Tri-amp 450Hz, 7kHz (active)
8.5 averaged 1kHz to 10kHz
9.3 averaged 1kHz to 10kHz
Average Peak
135dB 141dB
134dB 140dB
133dB 139dB
134dB 140dB
Average Peak
1000W (63.3V) 2000W
200W (40V) 400W
90W (27V) 180W
200W (40V) 400W
VQ 100
E: enquiries@tannoy.com
E: enquiries@tannoy.com
E: ventes@tannoy.com
E: info@tcgroup-americas.com
Recommended Amplifier Power
Low Frequency
Mid Frequency
High Frequency
Passive MF/HF
Nominal Impedance
Low Frequency
Mid Frequency
High Frequency
Construction
Enclosure
Grille
Finish
Connectors
Fittings
Dimensions
NET Weight
Notes:
(1) Average over stated bandwidth. Measured at 3 metres on axis, then referred to 1 metre
(2) Unweighted pink noise input, measured at 3 metres in an anechoic chamber,
then referred to 1 metre
(3) Accelerated Life Test (EIA RS426-B)
A full range of measurements, performance data, CLF and Ease™ Data can be
downloaded from www.tannoy.com
Full independent verification of published specifications carried out by NWAA Labs,
California can also be obtained from the downloads section of www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction
of new materials or manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
COLOUR
BLACK
2000W into 4 Ohms
400W into 8 Ohms
200W into 8 Ohms
400W into 8 Ohms
4ohms (4.1 Ohms Minimum)
8ohms (6.0 Ohms Minimum)
8ohms (8.6 Ohms Minimum)
18mm (0.71") birch plywood.
Vented and internally braced.
Powder coated perforated steel grille
Black or white textured paint
(custom colours on request)
Barrier Strip
8 x Recessed carrying handles
12 x M10 flying inserts
925mm x 694mm x 515mm
(36.42" x 27.32" x 20.28")
65kg (143.3 lbs)
PACKED QUANTITY
1
VQ 100 data file // issue 1.05 // 16.04.09