The head restraint in the center position can be
raised and lowered for tether routing or height ad-
justment. Refer to "Occupant Restraint Systems" in
"Safety" for further information.
NOTE:
To remove the center head restraint, raise it as far as
it can go. Then, push the release button and the
adjustment button at the base of each post while
pulling the head restraint up. To reinstall the head
restraint, put the head restraint posts into the holes
and push downward. Then, using the adjustment
button, adjust the head restraint to the appropriate
height.
Center Head Restraint
1 — Adjustment Button
2 — Release Button
STEERING WHEEL
Tilt/Telescoping Steering Column
This feature allows you to tilt the steering column
upward or downward. It also allows you to lengthen
or shorten the steering column. The tilt/telescoping
lever is located left of the steering wheel at the end
of the steering column.
Tilt/Telescoping Lever
43