Belling IB608FPYL Operating And Installation page 19

Adjusting the Day Time:
When the built in oven installed firstly the time of day must be adjusted according to below
instructions.
Touch the ON/OFF to pass the Wait mode. During this mode, touch the MODE for 5 seconds.
The Day Time symbol will be flashed continuously and you can adjust it with ˄ and ˅. To
complete the Day time adjustment, touch the MODE one more time or wait at least for 5
seconds.
The time only has to be set if the appliance is disconnected from the power supply for a long
time.
Adjusting the Cooker Time:
The Cooking time can be adjusted during WAIT mode or OPERATING mode.
Adjusting the Minute Minder:
Touch the MODE for ones. The Minute Minder symbol will be illuminated on the display. Also
"00:00"s will appear. Adjust the desired time period for the warning by using ˄ and ˅ while the
symbol is flashing. Some time after the completion of the adjustment, the minute minder
symbol will begin to light continuously. When the symbol begins to light continuously, the
audible warning time adjustment is done.
When the set time is up, the timer gives an audible warning and the minute minder symbol
and "00:00" begins to flash on the screen. Pressing any key will stop the audible warning and
the symbol disappears on the screen.
Adjusting the Cooking Duration Time:
This function is used to cook in the desired time range. The foods to be cooked are put into
the oven. The oven is adjusted to the desired cooking function. The oven temperature is
adjusted to the desired degree depending on the dish to be cooked. Touch on the MODE
twice (until you see Duration time symbol on the timer display screen). Adjusted the cooking
period for the food you wish to cook, by using the ˄ and ˅ while the timer is in this position.
Some time after the adjustment operation is completed, the day's time will appear on the
screen and the Duration time symbol will begin to continuously light on the screen.
At the completion of the set duration, the timer will stop the oven and give an audible
warning. Also, Duration time symbol will begin to flash on the screen. Touching any sensor of
the control unit will end the audible warning.
Adjusting the Cooking End Time:
This function is used to cook after a certain period of time, within certain duration. The food to
be cooked is put into the oven. The oven is adjusted to the desired cooking function. The
oven temperature is adjusted to the desired degree depending on the dish to be cooked.
16