Louver Control - Fujitsu AB*30LBAG series Service Instruction

5-7. LOUVER CONTROL

(Function Range)
Each time the button is pressed, the air direction range will
change as follows:
1 2 3
(Operation Range)
Cooling / Dry mode
Heating mode
Fan mode
Use the air direction adjustments within the ranges shown above.
The vertical airflow direction is set automatically as shown, in accordance with the type of operation selected.
Cooling / Dry / Fan mode
Heating mode
At the start of operation if the setting louver position is
after the louver moves from totally-enclosed position to
The indoor fan motor starts after the louver reaches to the setting position.
1-2. SWING OPERATION
When the swing signal is received from the remote controller, the vertical louver starts to swing.
The range of swing depends on the set airflow direction.
(Swinging Range)
Airflow direction set
1
2
3
4
When the indoor fan is either at S-Lo or Stop mode, the swinging operation is interrupted
and the louver stops at the memorized position.
( Stop mode means Operation stop.)
4
1 2 3
Horizontal flow
Downward flow
Range of swing
to
1 3
2 to 4
2 to 4
to
1 4
4
1
4
or ,the setting position is set to
1 2
. (Positioning Control)
3
05-08
(Fig.8 : Air Direction Range)
1
2
3
4
or
1
2