Setting Up The Phone; Adjusting The Stand - Polycom 1725-16824-001 User Manual

Setting Up the Phone

Adjusting the Stand

To set up the phone, do the following:
1. Adjust the stand. See
2. Connect the ferrite clamps to the network cable (and to the optional
computer cable, if you are connecting a computer to your phone). See
Attaching Ferrite Clamps
3. Connect the phone to the network and a power source. See
Network and Power Sources
4. Connect phone components. See
Cord on page 1-8 and
5. Adjust the screen and camera. See
Adjusting the Camera
Your phone is shipped with the stand positioned flat against the phone. To use
the phone, adjust the stand so that the phone is in a more upright position.
You can adjust the stand to one of five positions. The lowest position is labeled
MIN, and the highest position is labeled MAX.
The following figure shows the MIN and MAX labels for the stand.
Adjusting the Stand, below.
on page 1-5.
on page 1-5.
Connecting the Handset and Handset
Connecting Optional Components
Adjusting the Screen
on page 1-13.
Getting Started with Your Phone
Connecting
on page 1-8.
on page 1-12 and
1 - 3