Polycom 1725-31424-001 Deployment Manual page 52

Deployment Guide Polycom CX700
46
— Expiration notification controls when the end user is notified that a
certificate is about to expire.
8. Click OK to accept your changes.
9. Run the following command at an elevated command prompt:
gpupdate /force
Automatic enrollment will start working in about 90 seconds for any
applicable templates.
For Windows 2003
Enabling certificate AutoEnrollment is done via group policy on the domain
object containing the Polycom CX700 phone using the following steps:
To configure autoenrollment Group Policy for a domain:
1. Open Active Directory Users and Computers.
2. Right click on the domain containing the Polycom CX700 phone and
select Properties.
3. Click the Group Policy tab, make sure the Default Domain Policy is
highlighted and click the Edit button
4. Select Computer Configuration > Windows Settings > Security
Settings.
5. Click on Public Key Policies and in the right pane double-click
Autoenrollment Settings, confirm the Enroll certificates automatically
radio button is selected and click OK.