Polycom CX700 Quick Start Manual

Full duplex, two-way voip telephone

Hide thumbs Also See for CX700:

Download this manual See also: User Manual

Polycom® CX700 Quick Start Guide

Parts List

Thank you for choosing the Polycom

CX700. The Polycom CX700 connects

directly to your IP network, giving you

full duplex, two-way VoIP telephone

conversations using the embedded

Microsoft® Office Communicator 2007

unified communications client.

Polycom CX700 Console

Country-Specific Power Adapter

(May not be exactly as shown)

Polycom CX700 Quick Start Guide

These items are included in your Polycom

CX700 package. If you are missing any

items, contact your Polycom CX700

reseller.

Handset and Handset Cord

Network

Cable

USB Cable

(Optional Accessory)

Do you have a question about the CX700 and is the answer not in the manual?

Page 1: Parts List
Thank you for choosing the Polycom These items are included in your Polycom CX700. The Polycom CX700 connects CX700 package. If you are missing any directly to your IP network, giving you items, contact your Polycom CX700 full duplex, two-way VoIP telephone reseller.
Page 2 Connect the network cable to your ethernet port, and then plug the other end of the network cable into the network port on the back of the Polycom CX700. Power can be supplied to the Polycom CX700 via Power over Ethernet.
Page 3 Optional USB Cable For Use with Microsoft® Office Communications Server 2007 R2 You can connect your Polycom CX700 IP Your phone may need to update itself to phone to your computer using the optional the R2 firmware before displaying the USB cable, as shown.
Page 4 Polycom until the returned item is received by Polycom. The repaired or replaced (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR item will be shipped to Customer, at Polycom’s expense, not later than thirty (30) days after PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF...