Operating Instructions for Solar Charge Regulator LRM 1218 Safety information Meaning of the safety symbols DANGER! Failure to comply with this sign may result in danger to life or physical con- dition. WARNING! Failure to comply with this sign may result in injury.
The instruction manual should always be kept in the vehicle. All safety infor- mation must be passed on to other users. Purpose The MPP LRM 1218 solar charge regulator is for charging the batteries of the motorhome by means of the solar modules connected. Electroblocks The solar charge regulator limits and controls the charging voltage of the batteries.
Starter battery The preference is to load the leisure battery. As soon as the LRM 1218 re- stricts the loading voltage of the leisure battery, it indicates the broad char- ging of the leisure battery. Charging of the starter battery is activated at this moment.
" sensor Remove the ”Solar modules” connector on the LRM 1218 " Remove the ”Leisure and starter battery” connectors on the LRM 1218 " Plug the battery temperature sensor into the LRM 1218 " Plug the ”Leisure and starter battery” connectors into the LRM 1218 "...
Operating Instructions for Solar Charge Regulator LRM 1218 Fault Possible cause Remedy Batteries are not being Defective batteries Have the batteries checked charged If batteries are in perfect Contact customer service working order: Solar charge regulator defective Defective electroblock Contact customer service...
14.9 V is in consideration of the maximum input voltage of the consu- mers connected). Suitable EBL ... Schaudt electroblocks with SDTBUS (they have a separate input for electroblocks and other the solar currents of leisure and starter batteries, and a connector for...
Operating Instructions for Solar Charge Regulator LRM 1218 Appendix EC Declaration of Conformity Schaudt GmbH hereby confirms that the design of the LRM 1218 solar char- ger regulator complies with the following relevant regulations: The original CE declaration of conformity is available for reference at any time.
Page 9
" Mechanical layout 130.7 ø4 (2x) Fig. 2 Dimensions and connectors for the LRM 1218 solar charge regulator Solar module connection Leisure and starter battery connections, via electroblock as required STDBUS connector Control panel connector, via electroblock as required Battery temperature sensor connector Date: 22.07.2015...
Page 10
Operating Instructions for Solar Charge Regulator LRM 1218 (blank page) Date: 22.07.2015 822.0213 BA / EN...
Need help?
Do you have a question about the LRM 1218 and is the answer not in the manual?
Questions and answers