Configuration-Dependent Assignment (B-Client Ac30) - Kaba access manager 92 30 Technical Manual

Technical Manual
5.7.10

Configuration-dependent assignment (B-Client AC30)

5.7.10.1 Configuration 0: Subterminal without access
5.7.10.2 Configuration 1: Door with 2 door opener keys
5.7.10.3 Configuration 2: Door with 1 subterminal and 1 door opener key
Kaba access manager 92 30
The B-Client AC30 terminal software provides 6 default configurations which can be
assigned via a door management parameter.
The configuration 2 (door-opener with 1 subterminal and 1 door-opener key) is the
preset default upon delivery.
Below, 5 configurations are listed which can be used due to a limited number of in-
puts and outputs of Kaba access manager 92 30.
The tables on the following pages show the assignment of inputs and outputs for the
corresponding configuration type.
The inputs and outputs have no functions in this configuration. The logical group/de-
vice addresses 00/01 to 00/02 need to be set in the subterminals.
This configuration is recommended if the device is only used for time and atten-
dance.
Access
Door frame contact
Door opener key
Door opener relay
Access
Door frame contact
Door opener key
Door opener relay
GID/DID
04045376 - 05/2016
1
IN1
IN2
BO1
1
IN1
IN2
BO1
00/01
Installation
2
IN3
IN4
BO2
2
IN3
IN4
BO2
00/02
65