Design And Function; Opening The Housing - Kaba access manager 92 30 Technical Manual

Technical Manual
4

Design and function

4.1

Opening the housing

Kaba access manager 92 30
NOTICE
Danger for electronic components due to electrostatic discharge.
Improper handling can damage or destroy electrostatically sensitive components on
printed circuit boards (PCB).
• General ESD protective measures must be observed and applied.
Remove the housing cover in the following way:
1. Remove two screws M3x8 (TORX 8) on the device bottom side.
2. Swivel the bottom side of the cover and disengage it at the top.
04045376 - 05/2016
Design and function
23