Sony CMT-DH7BT Operating Instructions Manual page 69

other
not be
th of
MODE
00
es
is set
e the
n
0,000
which
bsite.
th to
k.
er
ks on
time
s on
on
itle,
ers
t
 Th e character code that can be
displayed by this system are as follows:

Upper cases (A to Z)

Lower cases (a to z)

Numbers (0 to 9)
Symbols (< > * +,  / [ ] _)

Other characters may not be displayed
correctly.
The surround eff ect is diffi cult to hear
when you are playing a Dolby Digital
or MPEG audio sound track.
 Check the speaker connections and
settings (pages 9 and 47).
 Depending on the DVD VIDEO, the
output signal may not be the entire 5.1
channel. It may be monaural or stereo,
even if the sound track is recorded in
Dolby Digital or MPEG audio format.
The sound loses stereo eff ect when
you play back an AUDIO CD, VIDEO
CD, MP3 audio track or DVD VIDEO.
 Make sure the system is connected
properly.
Bluetooth device
Pairing cannot be done.
 Move the Bluetooth device closer to
the system.
Connection is not possible.
 Th e Bluetooth device you attempted
to connect does not support the A2DP
and AVRCP profi les, and cannot be
connected with the system.
 Enable the Bluetooth function of the
Bluetooth device.
 Th e pairing registration information
has been erased. Perform the pairing
operation again.
CMT-DH7BT.GB.3-097-195-11(1)
 While connected to a Bluetooth device,
this system cannot be detected and a
connection cannot be established from
another Bluetooth device.
The sound skips or fl uctuates, or the
connection is lost.
 Th e system and the Bluetooth device
are too far apart.
 If there are obstacles between the
system and your Bluetooth device,
remove or avoid the obstacles.
 If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other Bluetooth device,
or a microwave oven nearby, move
them away.
The sound of your Bluetooth device
cannot be heard on this system.
 Turn up the volume on your Bluetooth
device fi rst, and then adjust the volume

using VOLUME +/ .
Severe hum or noise
 If there are obstacles between the
system and your Bluetooth device,
remove or avoid the obstacles.
 If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other Bluetooth device,
or a microwave oven nearby, move
them away.
 Turn down the volume of the
connected Bluetooth device.
The sound from the Bluetooth
headphones is distorted.
 Turn down the volume of the system

using VOLUME 
. If your
headphones have a volume control,
also adjust the volume using the
headphone's volume control.
Continued

GB
69