Sony CMT-DH7BT Operating Instructions Manual page 47

atically
sa.
ETUP"
d (page
OM
VR
ects
th no
bjects
tput
TRACK SELECTION
(DVD VIDEO only) Gives priority to the
sound track which contains the highest
number of channels when you play back
a DVD VIDEO on which multiple audio
(PCM, DTS, MPEG audio, or Dolby
Digital) formats 1) are recorded.
OFF: No priority given.
AUTO : Priority given.
2)
MULTI-DISC RESUME
(DVD VIDEO and VIDEO CD only)
ON: See page 23.
OFF: Does not store the resume playback
point in the memory. Playback starts at
the resume playback point only for the
current disc in the system.
3)
AUDIO DRC (Dynamic Range
Compression)
(DVD VIDEO and DVD-R/-RW in VR
mode only)
OFF: No compression of dynamic range.
STANDARD: Reproduces the sound
track with the kind of dynamic range that
the recording engineer intended. Useful
for watching movies at low volume late
at night.
MAX: Narrows the dynamic range fully.
1)
If each audio sound track has the same
number of channels, the system selects the
audio sound tracks in the order from PCM,
DTS, Dolby Digital, to MPEG.
2)
When you set "TRACK SELECTION" to
"AUTO", the language may change. Th e
"TRACK SELECTION" setting has higher
priority than the "AUDIO" settings in
"LANGUAGE SETUP" (page 44). However,
depending on the disc, this function may not
be performed.
3)
AUDIO DRC can only be performed with
Dolby Digital sources.
CMT-DH7BT.GB.3-097-195-11(1)
GB
47