Should you encounter a problem with
your system, do the following:
Make sure the power cord and
speaker cords are connected
correctly and fi rmly.
Find your problem in the
troubleshooting checklist below and
take the indicated corrective action.
If the problem persists aft er doing all
of the above, consult your nearest Sony
If the STANDBY indicator fl ashes
Immediately unplug the power cord,
and check the following items.
If your system has a voltage
selector, is the voltage selector set
to the correct voltage?
Are you using only the supplied
Is anything blocking the ventilation
holes on the rear of the system?
Aft er the STANDBY indicator
stops fl ashing, reconnect the power
cord, and turn on the system, If the
issue persists, contact your nearest
The display starts fl ashing as soon
as you plug in the power cord even
though you have not turned on the
(see step 8 of "Hooking
up the system" on page 11).
The clock or timer setting is canceled.
Th e power cord is disconnected or a
power failure occurred. Redo "Setting
the clock" (page 14). If you have set
the timer, redo "Waking up to music"
"– –:– –" appears in the display.
A power failure has occurred. Set the
clock (page 14) and timer settings
(page 69) again.
There is no sound.
Press VOLUME +
Th e headphones are connected to the
Check the speaker connections
Th e system is in pause mode, in Slow-
motion Play or in Lock Search. Press
to start the playback.
If the BLUETOOTH indicator
or fl ashing when a function other than
the Bluetooth function is selected, no
sound is heard through the speakers
or PHONES jack
. Press and hold
2 seconds until the BLUETOOTH
turns off .