Sony CMT-DH7BT Operating Instructions Manual page 46

BLACK LEVEL (COMPONENT OUT)
Select the black level (setup level)
for the video signals output from the
COMPONENT VIDEO OUT jacks.
You cannot select "BLACK LEVEL
(COMPONENT OUT)" when the system
outputs progressive signal.
OFF: Standard level
ON: Raise the standard black level. Use
this when the picture becomes too black.
3)
4:3 OUTPUT
Change this setting to watch 4:3
aspect ratio progressive signals. If
you can change the aspect ratio on
your progressive format (525p/625p)
compatible TV, change the setting on
your TV.
FULL: Select this when you can change
the aspect ratio on your TV.
NORMAL: Select this when you cannot
change the aspect ratio on your TV.
Shows a 16:9 aspect ratio signal with
black bands on left and right sides of the
image.
16:9 aspect ratio TV
1) Th e default setting varies depending on the
country.
GB
46
CMT-DH7BT.GB.3-097-195-11(1)
16:9
4:3 LETTER BOX
4:3 PAN SCAN
2)
Depending on the DVD VIDEO, "4:3
LETTER BOX" may be selected automatically
instead of "4:3 PAN SCAN" or vice versa.
3) Th is setting is eff ective only when
 you set "TV TYPE" in "SCREEN SETUP"
to "16:9".
 "P AUTO" or "P VIDEO" is selected (page
13).
Setting playback options  CUSTOM
SETUP
PAUSE MODE
(DVD VIDEO and DVD-R/-RW in VR
mode only)
AUTO: Th e picture, including subjects
that move dynamically, is output with no
jitter. Normally select this position.
FRAME: Th e picture, including subjects
that do not move dynamically, is output
in high resolution.
TRAC
(DVD
sound
numbe
a DVD
(PCM
Digita
OFF: N
AUTO
MULT
(DVD
ON: S
OFF: D
point i
the res
curren
AUDIO
Comp
(DVD
mode
OFF: N
STAN
track w
the rec
for wa
at nigh
MAX:
1)
If eac
numb
audio
DTS,
2)
When
"AUT
"TRA
prior
"LAN
depen
be pe
3)
AUD
Dolb
CMT-