Sony CMT-DH7BT Operating Instructions Manual page 54

To erase all the pairing registration
information
1
Press FUNCTION +/
to select "BLUETOOTH" (or press
BLUETOOTH  
When the system is connected with a
Bluetooth device (when the Bluetooth
device name or other information
appears in the system display), press
and hold BLUETOOTH OPR
the unit for about 2 seconds to put the
system in Bluetooth standby mode.

2
Press CLEAR .
"Delete?" appears.

3
Press ENTER .
"Complete!" appears and all the
pairing information is erased.
Note
In order to connect with a Bluetooth device
aft er performing this operation, you must enter
the passcode again.
GB
54
CMT-DH7BT.GB.3-097-195-11(1)
Playing music of a Bluetooth device
You can operate a Bluetooth device by
connecting the system and a Bluetooth

repeatedly
device using AVRCP. If the system is not
connected with a Bluetooth device using
on the unit).
AVRCP, "Not In Use" appears when you
operate the system.
1
Select the Bluetooth function.
Press FUNCTION +/

on
to select "BLUETOOTH" (or press
BLUETOOTH 
2
Establish a connection from the
Bluetooth device.
For details about the operations of
the Bluetooth device, refer to the
operation manual supplied with your
Bluetooth device.
Once the connection is established,
the system display changes as follows:
"Connect"  Name of the Bluetooth
device
3
Start playback.
Press 

Depending on the Bluetooth device,
you may need to start up the AV
soft ware of the Bluetooth device
beforehand.
4
Adjust the volume.
Press VOLUME +/
To check the address of a connected
Bluetooth device
Press DISPLAY
device name appears in the system
display.
Th e Bluetooth device address appears for
8 seconds.

repeatedly

on the unit).
 (or BLUETOOTH 
on the unit).

.

while the Bluetooth
To can
Blueto
Press a
on the
BLUET
Other
To
Pause
Stop p
Select
Find a
a fi le
View t
Blueto
device
Note
Th ese o
certain
actual o
connec
Notes
device
 If you
Bluet
opera
Bluet
 Depe
you c
of the
 When
is pre
headp
a con
anoth
CMT-