Cisco Nexus 9364C Hardware Installation Manual page 13

Overview
1 Fan modules (3) with slots
numbered from 1 (left) to 3 (right)
2 Management port (1—RJ-45
copper port)
3
Management port (1—SFP optical
port)
4 USB port (1)
5 Console port (1)
Depending on whether you plan to position the ports in a hot or cold aisle, you can order the fan and power
supply modules with port-side intake or port-side exhaust airflow. For port-side intake airflow, the fan and
AC power supply modules have burgundy coloring. For port-side exhaust airflow, the fan and AC power
supplies have blue coloring. You can also order the 1200-W HVAC/HVDC power supply which has
dual-direction airflow with white coloring. Dual-direction airflow modules automatically use the airflow
direction of the other modules installed in the switch.
The fan and power supply modules are field replaceable and you can replace one fan module or one power
supply module during operations so long as the other modules are installed and operating. If you have only
one power supply installed, you can install the replacement power supply in the open slot before removing
the original power supply.
6 Grounding pad
7 Power supply modules (1 or 2) (AC power supplies shown)
with slots numbered 1 (left) and 2 (right)
8 Notch on both sides of the chassis for locking the power
supply end of the chassis to the bottom support rails
(four-post rack installations).
9 Screw holes for center-mount bracket (two-post rack
installations)
10 Screw holes for front mounting brackets (four-post rack
installations)
Cisco Nexus 9364C ACI-Mode Switch Hardware Installation Guide
Overview
3