Please read all of the installation instructions carefully before installing the product. Improper installation will void manufacturer’s warranty. Congratulations on purchasing a RVS-875-DL 2.4" Dual Lens Full HD Dash Camera With GPS With this manual you will be able to properly install and operate the unit.
If you have questions about this product, contact: Rear View Safety 1797 Atlantic Avenue Brooklyn, NY 11233 Tel: 1.800.764.1028 IN NO EVENT SHALL SELLER OR MANUFACTURER BE LIABLE FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE PRODUCT OR THE USE OF ANY PRODUCT.
Page 5
Before drilling please check that no cable or wiring is on the other side of the wall. Please clamp all wires securely to reduce the possibility of them being damaged while vehicle is in use. Keep all cables away from hot/moving parts and electrical noisy components. We recommend doing a benchmark test before installation to insure that all components are working properly.
Page 7
1) Menu/Mode 2) Toggle Selection Up 3) OK/Confirm 4) Toggle Selection Down 5) IR Lights 6) Rear Passenger Camera (130° Viewing Angle) 7) Charge Indicator Light 8) On Indicator Light 9) 2.4 LCD Display 10) USB Port 11) HDMI Port 12) TV Out 13) Reset 14) Power Switch...
Short press: Menu switch / Toggle all functions Video Mode: Short press to confirm video setting Photo Mode: Short press to confirm photo setting Video/Photo/Playback mode: Short press to confirm playback setting Video Mode: Long press to switch between record mode/Photo mode/Play- back mode Rear View Safety...
Page 9
Menu Setting Mode: Short press to switch between system menu/video/pho- to/playback functions menu While Recording: Short press M to lock video Up: Toggle selection up / Toggle mute / Toggle IR Menu Mode: Short press to toggle selection up Playback Mode: Toggle selection up Video mode: Short press to open/close sound Photo mode: Short press to zoom Long press to open/close IR lights...
Page 10
Short press power button to turn camera on (indicator light will turn on). Long press power button again to enter video mode (this will turn off indication light). Note: the device will be turn off automatically after a warning of low battery when the power is very low. Rear View Safety...
Page 11
USB Power Powering with the USB cable is intended for use while charging, though the full built-in battery lasts about 30 minutes. Video Mode A video recording icon will appear in the top left corner of the LCD during video mode. Short press OK to start recording. Photo Mode Long press M button to switch to photo mode (a photo icon will appear on the top left corner of the LCD screen).
Note: Camera records when it detects motion. It stops recording when there is no motion for 10 secs. Record Audio: ON/OFF (Default: ON) Date Stamp: ON/OFF (Default: ON) G-Sensor: OFF/High/Middle/Low (Default: Middle) Parking Mode: ON/OFF (Default: OFF) Rear View Safety...
System Setting Short press M twice to goggle to system setting. Short press UP/DOWN to toggle settings, press OK to enter setting, short press OK again to confirm modification. Date/Time: Setting Y/M/D and time. Press OK to enter, toggle up/down to choose and press OK to confirm.Press M to save/exit.
Date Stamp: Off/Date/Date and Time Playback Setting After powering on, long press M button twice to switch the playback setting (Playback icon will be shown on the LCD top right corner). Press M button one time to enter setting. Rear View Safety...
Delete: Delete Current/Delete All (Default: Delete Current) Protect: Lock Current/Unlock Current/Lock All/Unlock All Slide Show: 2s/5s/8s Software Installation Download BlackView CAM Player and open desired video file. Reverse With Confidence ™...
TF card. Fuzzy image Lens could be dirty. Clean lens. Dark image when shooting sky/water Adjust the "EV" in menu setting. Incorrect color during cloudy weather Please check the “white balance” is Auto or not in the menu. Rear View Safety...
Horizontal stripes image interference This is due to the wrong setting of light frequency error, please set the frequency 60HZ or 50HZ according to the local power supply. Troubleshooting 1. Dash cam do not power on after car engine start: Please check whether the power connection is normal.
OTHERS OR THE UNAUTHORIZED USE OF NONCONFORMING PARTS; THE DAMAGE IS DUE TO NORMAL WEAR AND TEAR, THIS DAMAGE IS DUE TO ABUSE, IMPROPER MAINTENANCE, NEGLECT OR ACCIDENT; OR THE DAMAGE IS DUE TO USE OF THE REAR VIEW SAFETY, INC. SYSTEM AFTER PARTIAL FAILURE OR USE WITH IMPROPER ACCESSORIES.
FOR ANY INJURY, LOSS OR DAMAGE, INCIDENTAL OR CONSEQUENTIAL, ARISING OUT OF THE USE OR INTENDED USE OF THE PRODUCT. IN NO EVENT SHALL REAR VIEW SAFETY AND/OR ITS AFFILIATES HAVE ANY LIABILITY FOR ANY LOSSES (WHETHER DIRECT OR INDIRECT, IN...
Page 20
If you have any questions about this product, contact: Rear View Safety, Inc. 1797 Atlantic Avenue Brooklyn, NY 11233 800.764.1028 Better Cameras. Better Service. IT’S OUR GUARANTEE. Rear View Safety...
Need help?
Do you have a question about the RVS-875-DL and is the answer not in the manual?
Questions and answers