Adjust Switch On Time And Measuring Cycle - vacuubrand DVR 2pro Instructions For Use Manual

Operation
30

5.2.2 Adjust switch on time and measuring cycle

Adjust power‑on time
1. Switch on the gauge and press
5 On the display: Adjust power‑on time.
5 Display of the new pre‑set power‑on time, e. g., 5
Minutes (= delivery state).
2. Press the
UP/DOWN
required
power‑on time is displayed, e. g., 20 Minutes.
Power‑on time min. 1 – 600 Minutes;
ƒ ƒ
Changing pointer direction with
ƒ ƒ
= decrease value /
5 Display of the new pre‑set power‑on time.
5 This setting switches off the gauge automatically after 20
minutes.
3. Press key ON/OFF
adjustment.
5 On the display: Pre‑select measuring cycle.
MODE
key repeatedly or hold it until the
MODE key
= increase value
to confirm the
N°: 999341_EN_DVR 2pro/12.07.2017
key.
On
= permanent ON