Assembly and connection
Insert battery
20
4.2 Insert (replace) battery
The battery is enclosed to the delivery and must be inserted into
the gauge before installation.
Insert (replace)
1
Required tool Phillips screwdriver size 1.
1. Use a Phillips screwdriver to unscrew the screw of the battery
compartment lid.
2. Remove battery compartment lid with captive screw.
If changing the battery, please remove the discharged battery.
IMPORTANT! Tools for battery replacement must not cause
3. Put in the new battery in correct position (compare to figure
inside the housing).
4. Put the battery compartment lid in correct position onto the
gauge and fix it stress‑free by the captive screw.
1
approved batteries see chapter: 8.2 Ordering information on page 45
battery
a short‑circuit.
N°: 999341_EN_DVR 2pro/12.07.2017