Adjust Switch On Time And Measuring Cycle - vacuubrand DVR 3pro Instructions For Use Manual

Operation
28

5.2.2 Adjust switch on time and measuring cycle

5.2.2 Adjust switch on time and measuring cycle
Adjust power‑on time
1. Switch on the gauge and press MODE
5 On the display: Adjust power‑on time.
5 Display of the new pre‑set power‑on time, e. g., 5
Minutes (= delivery state).
2. Press the UP/DOWN
UP/DOWN
required
power‑on time is displayed, e. g., 20 Minutes.
Power‑on time min. 1 – 600 Minutes;
ƒ
Changing pointer direction with MODE key
ƒ
= decrease value /
5 Display of the new pre‑set power‑on time.
5 This setting switches off the gauge automatically after 20
minutes.
3. Press key ON/OFF ON/OFF
adjustment.
5 On the display: Pre‑select measuring cycle.
MODE
key repeatedly or hold it until the
MODE key
= increase value
to confirm the
20901134_EN_DVR 3pro_V1.4_060420
key.
On On
= permanent ON