Table of Contents

Advertisement

Fill the rinse aid dispenser when the
indicator (D) becomes clear.
Fill the rinse aid dispenser when the
indicator (E) becomes clear.

Daily use

1. Open the water tap.
2. Press the on/off button to activate the appliance.
Make sure that the appliance is in programme selection
mode.
If the salt indicator is on, fill the salt container.
Make sure that there is rinse aid in the rinse aid
dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme for the type of
load and the degree of soil.
Using the detergent
A
B
D
30
20
A
B
D
30
20
1. Press the release button (B) to open the lid (C).
2. Put the detergent, in powder or tablets, in the
compartment (A).
3. If the programme has a prewash phase, put a small
quantity of detergent in the compartment (D).
4. Close the lid. Make sure that the release button
locks into position.
C
C
You can turn the selector of the released
quantity (B) between position 1 (lowest
quantity) and position 4 or 6 (highest
quantity).
Using the multi-tablets
When you use tablets, that contain salt and rinse aid, do
not fill the salt container and the rinse aid dispenser.
1. Adjust the water softener to the lowest level.
2. Set the rinse aid dispenser to the lowest position.
Setting and starting a programme
Starting a programme
1. Keep the appliance door ajar.
2. Press the on/off button to activate the appliance.
Make sure that the appliance is in programme
selection mode.
3. Press the programme button repeatedly until the
indicator of the programme you want to select
comes on.
4. Close the appliance door to start the programme.
Opening the door while the appliance operates
If you open the door while a programme is running, the
appliance stops. It may affect the energy consumption
and the programme duration. When you close the door,
the appliance continues from the point of interruption.
Cancelling the programme
Press and hold the programme button until the
appliance is in programme selection mode.
Make sure that there is detergent in the detergent
dispenser before you start a new programme.
End of the programme
When the programme is completed the indicator
on.
1. Press the on/off button to deactivate the appliance.
2. Close the water tap.
If you do not deactivate the appliance
within 5 minutes all indicators goes off.
This helps to decrease energy
consumption.
is
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents