GRISO 850
Installing the flywheel
•
Position the flywheel.
NOTE
RESPECT THE FLYWHEEL POSITIONING REFERENCES.
CAUTION
THE SCREWS MUST BE REPLACED WITH NEW ONES AT
THE FOLLOWING REFITTING AS THEY ARE SUBJECT TO
HIGH LOADS AND STRESS.
•
Position the locking tool on the flywheel
and tighten the six flywheel sealing
screws operating diagonally and in
stages.
•
Fit the clutch.
Specific tooling
12.91.18.01 Tool to lock the flywheel and the
starting ring gear
See also
Assembling the
clutch
Generator
Removing the generator
•
Unscrew and remove the six screws
and collect the bushings.
Engine
ENG - 93