Engine
Flywheel
Removing the flywheel
•
Remove the clutch.
•
Position the locking tool on the flywheel
and loosen the six flywheel fixing
screws operating diagonally and in
stages.
•
Remove the locking tool.
Specific tooling
12.91.18.01 Tool to lock the flywheel and the
starting ring gear
•
Remove the flywheel.
See also
Disassembling the
clutch
Checking
•
Check that the flywheel surface that contacts the plate is not scratched.
•
Check that the contact faces on the crankshaft are not distorted; if they are, replace the
flywheel.
ENG - 92
GRISO 850