GRISO 850
Installing
•
Insert two new pads, placing them so
that the holes are aligned with the cal-
liper holes.
CAUTION
ALWAYS REPLACE BOTH PADS AND MAKE SURE THEY
ARE CORRECTLY POSITIONED INSIDE THE CALLIPER.
•
Position the anti-vibration plate.
•
Insert both pins.
•
Position both split pins.
•
Abut the plungers against the pads,
acting on the brake pump lever several
times.
•
Check the brake fluid level in the res-
ervoir.
Rear brake pads
Braking system
BRAK SYS - 209