MOTO GUZZI GRISO 850 2007 Service Station Manual page 47

GRISO 850
Electrical system
Injector 2 Error DC V DC ECU 30
Pump Relay Error ECU 36
Local Loopback Error ECU 37
Start-up Remote Error DC V DC ECU 44
Remote Error Start-up DC Gnd ECU 45
Canister Error DC V DC ECU 46
Canister Error DC Gnd ECU 47
Battery Error Hig ECU 50
Generic ECU Error ECU 51
Signal Panel Error ECU 54
Self-adaptability Value Error ECU 55
Vehicle Speed Error ECU 56
Stepper Error AC ECU 60
Stepper Error DC V DC ECU 61
Stepper Error DC Gnd ECU 62
Not recognised error ECU 00
INSTRUMENT PANEL ERRORS
In this mode a chart is displayed showing potential errors in the immobilizer and its sensors.
This is the error decoding chart:
Description: Immobilizer failure: Key code read but not recognised. Error code: DSB 01
Description: Immobilizer failure: Key code not read (Key not inserted or transponder broken) Error code:
DSB 02
Description: Immobilizer failure: Aerial not working (Open or short-circuited). Error code: DSB 03
Description: Immobilizer failure: Internal controller failure. Error code: DSB 04
Description: - Error code: DSB 05
Description: Air temperature sensor failure. Error code: DSB 06
Description: Oil sensor failure. Error code: DSB 07
Description: Oil pressure failure. Error code: DSB 08
The instrument panel keeps all previous errors stored in its memory.
DELETE ERRORS
This option deletes instrument panel errors only, a further confirmation is requested.
ELE SYS - 47