Maintenance
•
Remove the dipstick (1).
•
Check oil level on the dipstick (1).
•
The oil level is correct when it close to the "MAX" mark.
MAX = maximum level
MIN = minimum level
Add engine oil if required:
•
Unscrew and remove the dipstick (1).
•
Top-up with engine oil until it goes above the minimum level marked "MIN".
CAUTION
DO NOT ADD ADDITIVES OR ANY OTHER SUBSTANCE TO
THE FLUID. WHEN USING A FUNNEL OR ANY OTHER EL-
EMENT, MAKE SURE IT IS PERFECTLY CLEAN.
Replacement
NOTE
HOT OIL IS MORE FLUID AND WILL DRAIN OUT MORE EASILY AND COMPLETELY.
•
Place a container with + 4000 cm³ (245
cu in) capacity under the drainage plug
(2).
•
Unscrew and remove the drainage
plug (2).
•
Unscrew and remove the filler plug (3).
•
Drain the oil into the container; allow
several minutes for oil to drain out com-
pletely.
•
Check and if necessary, replace the
sealing washers of drainage plug (2).
•
Remove any metal scrap attached to
the drainage plug (2) magnet.
MAIN - 32
GRISO 850