Cisco Preparative Procedures & Operational User Guide
o audits—Enables or disables the logging of all audit log events.
o events—Enables or disables the logging of all system events.
o faults—Enables or disables the logging of all system faults.
12) Commit the transaction:
Firepower-chassis /monitoring # commit-buffer
4.4.2 Configure Syslog via GUI
1) Choose
Platform Settings > Syslog.
2) Configure Local Destinations:
a) Click the
Local Destinations
b) On the
Local Destinations
Name
Console
Section
Admin State
Level
field
Monitor
Section
Admin State
Level
drop-down list
© 2016 Cisco Systems, Inc. All rights reserved.
tab.
tab, complete the following fields:
Description
field
Whether the Firepower chassis displays syslog messages on
the console.
Check the
messages displayed on the console as well as added to the
log. If the
are added to the log but are not displayed on the console.
If you checked the
State, select the lowest message level that you want
displayed on the console. The Firepower chassis displays
that level and above on the console.
This can be one of the following:
field
Whether the Firepower chassis displays syslog messages on
the monitor.
Check the
messages displayed on the monitor as well as added to the
log. If the
are added to the log but are not displayed on the monitor.
If you checked the
State, select the lowest message level that you want
displayed on the monitor. The system displays that level
and above on the monitor.
This can be one of the following:
Enable
check box if you want to have syslog
Enable
check box is unchecked, syslog messages
Enable
•
Emergencies
•
Alerts
•
Critical
Enable
check box if you want to have syslog
Enable
check box is unchecked, syslog messages
Enable
•
Emergencies
check box for
Console - Admin
check box for
Monitor - Admin