Cisco Firepower 4110 Preparative Procedures & Operational User Manual page 30

Cisco Preparative Procedures & Operational User Guide
4) Configure Local Sources:
a) Click the Local Sources
b) On the Local Sources
Name
Faults Admin State
Audits Admin State
Events Admin State
c) Click Save.
© 2016 Cisco Systems, Inc. All rights reserved.
tab.
tab, complete the following fields:
Description
field Whether system fault logging is enabled or not. If the
Enable
all system faults.
field Whether audit logging is enabled or not. If the
check box is checked, the Firepower chassis logs all audit
log events.
field Whether system event logging is enabled or not. If the
Enable
all system events.
check box is checked, the Firepower chassis logs
check box is checked, the Firepower chassis logs
Enable