Remote Operation - Panasonic KX-TG1221 Operating Instructions Manual

TG122x.book Page 25 Wednesday, September 29, 2010 2:13 PM
Key Operation
1 or {<} Repeat message
(during playback)
2 or {>} Skip message (during
playback)
Enter the "Settings"
3
menu
Play new messages
4
Play all messages
5
Play greeting message
6
Record greeting
76
message
Turn answering system
8
on
Pause message
{MENU}
Stop recording
9
Stop playback
Turn answering system
)
off
*3
Erase currently playing
*4
message
*4
Erase all messages
*5
Reset to a pre-recorded
*6
greeting message
*1 If pressed within the first 5 seconds of a
message, the previous message is played.
*2 To resume playback:
{r}: "Playback" s {OK}
*3 You can also erase as follows:
{CLEAR} s {r}: "Yes" s {OK}
*4 You can also erase as follows:
{MENU} s {r}: "Erase all" s {OK}
s {r}: "Yes" s {OK}
Calling back (Caller ID
subscribers only)
If caller information is received for the call, you
can call the caller back while listening to a
message.
1
Press {MENU} during playback.
2
{r}: "Edit & Call" s {OK}
For assistance, please visit http://www.panasonic.com/help
L To edit the number before calling back,
press {MENU} repeatedly until the
phone number is shown in the desired
*1
format (page 21).
3
{C}
Erasing all messages
1
{MENU}
2
{r}: "Answering device" s {OK}
3
{r}: "Erase all msg." s {OK}
4
{r}: "Yes" s {OK} s {OFF}

Remote operation

*2
Using a touch-tone phone, you can call your
phone number from outside and access the
unit to listen to messages or change
answering system settings. The unit's voice
guidance prompts you to press certain dial
keys to perform different operations.
Remote access code
A 3-digit remote access code must be entered
when operating the answering system
remotely. This code prevents unauthorized
parties from listening to your messages
remotely. The default setting is "111".
Important:
L To prevent unauthorized access to this
product, we recommend that you regularly
change the remote code.
1
{MENU}
2
{r}: "Answering device" s {OK}
3
{r}: "Settings" s {OK}
4
{r}: "Remote code" s {OK}
5
Enter the desired 3-digit remote access
code.
6
{OK} s {OFF}
Deactivating remote operation
Press {*} in step 5 on "Remote access code",
page 25.
L The entered remote access code is deleted.
Answering System
25