Table of Contents
Advertisement
TG122x.book Page 5 Wednesday, September 29, 2010 2:13 PM
For your safety
To prevent severe injury and loss of life/
property, read this section carefully before using the
product to ensure proper and safe operation of your
product.
WARNING
Power connection
L Use only the power source marked on the product.
L Do not overload power outlets and extension
cords. This can result in the risk of fire or electric
shock.
L Completely insert the AC adaptor/power plug into
the power outlet. Failure to do so may cause
electric shock and/or excessive heat resulting in a
fire.
L Regularly remove any dust, etc. from the AC
adaptor/power plug by pulling it from the power
outlet, then wiping with a dry cloth. Accumulated
dust may cause an insulation defect from moisture,
etc. resulting in a fire.
L Unplug the product from power outlets if it emits
smoke, an abnormal smell, or makes an unusual
noise. These conditions can cause fire or electric
shock. Confirm that smoke has stopped emitting
and contact the Panasonic Call Center at 1-800-
211-PANA (1-800-211-7262).
L Unplug from power outlets and never touch the
inside of the product if its casing has been broken
open.
L Never touch the plug with wet hands. Danger of
electric shock exists.
Installation
L To prevent the risk of fire or electrical shock, do not
expose the product to rain or any type of moisture.
L Do not place or use this product near automatically
controlled devices such as automatic doors and
fire alarms. Radio waves emitted from this product
may cause such devices to malfunction resulting in
an accident.
L Do not allow the AC adaptor or telephone line cord
to be excessively pulled, bent or placed under
heavy objects.
Operating safeguards
L Unplug the product from power outlets before
cleaning. Do not use liquid or aerosol cleaners.
L Do not disassemble the product.
L Do not spill liquids (detergents, cleansers, etc.)
onto the telephone line cord plug, or allow it to
For assistance, please visit http://www.panasonic.com/help
Important Information
become wet at all. This may cause a fire. If the
telephone line cord plug becomes wet,
immediately pull it from the telephone wall jack,
and do not use.
Medical
L Consult the manufacturer of any personal medical
devices, such as pacemakers or hearing aids, to
determine if they are adequately shielded from
external RF (radio frequency) energy. (The product
operates in the frequency range of 1.92 GHz to
1.93 GHz, and the RF transmission power is 115
mW (max.).)
L Do not use the product in health care facilities if any
regulations posted in the area instruct you not to do
so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF
energy.
CAUTION
Installation and location
L Never install telephone wiring during an electrical
storm.
L Never install telephone line jacks in wet locations
unless the jack is specifically designed for wet
locations.
L Never touch uninsulated telephone wires or
terminals unless the telephone line has been
disconnected at the network interface.
L Use caution when installing or modifying telephone
lines.
L The AC adaptor is used as the main disconnect
device. Ensure that the AC outlet is installed near
the product and is easily accessible.
L This product is unable to make calls when:
– the handset batteries need recharging or have
failed.
– there is a power failure.
Battery
L We recommend using the batteries noted on page
4. USE ONLY rechargeable
Ni-MH batteries AAA (R03) size.
L Do not mix old and new batteries.
L Do not open or mutilate the batteries. Released
electrolyte from the batteries is corrosive and may
cause burns or injury to the eyes or skin. The
electrolyte is toxic and may be harmful if
swallowed.
L Exercise care when handling the batteries. Do not
allow conductive materials such as rings,
bracelets, or keys to touch the batteries, otherwise
a short circuit may cause the batteries and/or the
conductive material to overheat and cause burns.
5
Advertisement
Table of Contents
