Dual Bridge Adapter - ATN OTS-17 Operator's Manual

4. Loosen screw (3). Push button (2) and insert the bracket of
the OTS into rail (4) of the helmet mount.
5. Place the helmet with OTS onto head.
6. Loosen the screw (3) and move the unit for proper eye relief
adjustment.
7. The OTS helmet mount has a flip-up mechanism. Push the
button (5) on the side of mount and lift the unit up until the unit
fixates in the top position.
8. Push the same button (6) to lower OTS to viewing position.
9. The OTS can be placed onto the right or left eye. In order to
readjust the monocular for use with the other eye, take the
unit off the headmount adapter, turn the unit to other side (for
180º) and mount it on the adapter through the rail on this side.
Push the button (6) and move the device along the slide-rail
(6) for comfortable position.
Figure 2-4. Attaching OTS to helmet mount

2.2.4. DuAl BRIDGE ADAPTER

The Dual Bridge Adapter is designed to connect two OTS-17 in
binocular. Adapter allows also the binocular to be attached to the
headmount or helmet mount.
To mount the units with Dual Bridge Adapter perform the fol-
lowing:
1. Align the unit and the adapter.
2-6
1
5
2
3
4
A
6