Adapter For A.r.m.s. Mounts - ATN PS-22 Operator's Manual

3. Loose the mount nuts. Install the sight onto the rail as close to
the riflescope as possible. The light suppressor should cover
the riflescope objective lens.
4. Tighten the mount nuts using screwdriver.
FIGURE 2-6. ASSEMBLING PS-22 WITH 7/8" WEAVER MOUNT

2.1.5. ADAPTER FOR A.R.M.S. MOUNTS

M4X8 SCREW
M5X8 SCREW
FIGURE 2-7. ASSEMBLING PS-22 WITH A.R.M.S. MOUNT
The PS-22 can be installed on MIL-STD-1913 rail by means of
using an A.R.M.S. #10 or A.R.M.S. #19 ACOG mounts. Optional
adapter is used to attach the sight to the said mounts.
M4X8 SCREWS
ADAPTER
A.R.M.S.#19 MOUNT
2-7