Table of Contents
Advertisement
2. Push the clamps (2) on the front of adapter.
3. Slide the unit rearwards until the alignment boss aligns with
the alignment groove (3) on the adapter. Push until the unit
locks into the adapter.
4. Repeat for second unit.
For detachment the unit push the clamps on the front of adapter
and slide the unit forwards.
2
3
2.2.5. 2X AFOCAl lENS
2X afocal lens is optical dubler specifically designed for thermal ima-
ging systems. Using interchangeable connectors the lens can connect
to the OTS. Focal length of the system simply increases by a factor of
2. To install 2X afocal lens screw it into the objective lens of scope.
OTS 2X afocal lens is shock and vibration tested.
Figure 2-6. OTS with 2X Afocal lens
1
Figure 2-5. Dual Bridge Adapter
2-7
Advertisement
Table of Contents
