Table of Contents
Advertisement
3.2.6. ZOOm
Push ZOOM button to activate a digital zoom function. When button
is pushed first time, the scope will display a scene magnified 2X.
After second pushing the magnification will changed to 4X. Next
pushing will reset the magnification to 1X.
3.2.7. ShuT DOWN OPERATIONS
To finish the work, perform the following:
1. Use the ON-OFF button to turn the scope off.
2. Replace the protective cover on the objective lens.
3. Replace the protective cap on the output connector socket.
4. Return the scope to the case.
3.2.8. WEAPON mOuNT ADJuSTmENT
The vertical and horizontal positions of the reticle want to be cen-
tered in their respective travel range. Typically this initial zero is
then adjusted to the desired point of impact for the chosen ammu-
nition. The self-centering refers to the position of the reticle in the
scopes field of view not its position relative to the optical axis. Using
the OTS weapon mount impact can be used to for initial sighting in
or zero. Ideally this should be done at 200 yards or 100 yards if the
ballistic curve for your chosen ammo is known.
Figure 3-5. Windage and Elevation Adjustment
3-6
5
4
1
2
3
Advertisement
Table of Contents
