Table of Contents
Advertisement
4. The OTS-17 headmount has a flip-up mechanism. Push the
button (4) on the side of mount and lift the unit up until the unit
fixates in the top position.
5. Push the same button (4) to lower OTS-17 to the viewing po-
sition.
6. The OTS-17 can be placed onto the right or left eye. In or-
der to readjust the monocular for use with the other eye, take
the unit off the adapter, turn the unit to other side (for 180º)
and mount it on the headmount adapter through the rail on
this side. Push the button (5) and move the device along the
slide-rail (6) for comfortable position.
2
1
3
Figure 2-3. Attaching OTS to head mount
2.2.3. hElmET mOuNT
Attachment of OTS to a standard PASGT helmet. The helmet mount
fits securely onto helmet via a rugged strapping device and grooved
hooks. With helmet mount, the OTS can be positioned directly in
front of user's eyes or flipped up out of viewing position.
1. Install the mount onto helmet as shown on the picture.
2. Tighten and fixate the straps (1)
3. Attach the monocular to the rail.
4
6
5
2-5
Advertisement
Table of Contents
