Hammond Sk1 Manual page 92

92 OD / EFF (Overdrive / E ects) - continued
Phaser
is creates a sound with a shifting phase, adding a twisting effect to the sound..
❹
❺ PHASER - RATE
Adjusts the frequency speed. It is linked with the [EFFECT AMOUNT] knob.
e setting range is 0 to 127.
❻ PHASER - DEPTH
Adjusts the depth of modulation.
e setting range is 0 to 127.
❼ PHASER - RESONANCE
Adjusts the resonance (feed-back) amount.
e setting range is 0 to 127.
At higher values, the sound is modulated beyond normal recognition.
❽ PHASER - MANUAL
Sets the middle frequency of the phase effect.
e setting range is 0 to 127.
❾ PHASER - MIX
Adjusts the volume balance between the "dry" and the effect sound.
e setting range is 0 to 127. At 0, only "dry" is heard.
er as the value increases. At 127 the ratio between the "dry" and the effect sounds
becomes 1:1.
❿ PHASER - HPF
Controls the frequency range of the effect.
e setting range is 0 to 127. At 0 the effect is added to all frequencies.
added to the higher frequencies as the value increases.
HA<O> Sk1 / Sk2 Owner's Manual
❺ ❻ ❼
e cycle becomes faster as the value increases.
e modulation becomes deeper as the value increases.
e resonance becomes greater as the value increases.
e frequency becomes higher as the value increases.
e effect level becomes great-
❽ ❾ ❿
Level
Depth
Modulation
HPF
e ect range
e effect is
Rate
Mix
Manual
Frequency