Hammond Sk 1 Special Utility Features
Hide thumbs
Also See for Sk 1:
- Owner's manual (158 pages) ,
- Manual (150 pages) ,
- Introduction manual (10 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hammond Sk 1
Summary of Contents for Hammond Sk 1
- Page 1 SPECIAL UTILITY FEATURES...
- Page 3 Special Utility Features SPECIAL UTILITY FEATURES TUNE Edit Menu This Advanced Feature Menu allows you to change the overall tuning pitch of the entire instrument. The reference pitch is “A-440". The selectable range is from “A-430" through “A-450." To access the TUNE Edit Menu, do the following: From any of the PLAY Mode screens, touch the MENU/EXIT Touch Button once.
- Page 4 Special Utility Features Now touch the ENTER Touch Button once. The Information Center Display should now look like this: You are now in the TUNE Edit Menu. Turn the VALUE Rotary Control to the right to raise the pitch. Turn the VALUE Rotary Control to the left to lower the pitch. DEFAULT Edit Menu - Reset Procedure This Advanced Feature Menu allows you to reset the Sk-series instrument to factory-default settings.
- Page 5 WARNING!: Doing any of the following procedures will erase all parameters, settings and registrations, returning the instrument to the original Hammond factory default settings. Use the PAGE LEFT and PAGE RIGHT Touch Buttons to select which portions of the instrument will be reset with factory-default settings.
- Page 6 Special Utility Features SYSTEM Menu This Advanced Feature Menu allows you to select the Audio Mode of the instrument, and to see which version of software is installed in your Sk-series instrument. To access the SYSTEM Edit Menu, do the following: From any of the PLAY Mode screens, touch the MENU/EXIT Touch Button once.
- Page 7 Special Utility Features Page 1 - Audio Output This Advanced Feature allows you to select the type of audio signal from the LINE OUT jacks. You can select either “MONO’” (the signal is identical from both the “L” and “R” LINE OUT jacks) or “STEREO” (separate Left and Right audio signals for Stereo directionality).
- Page 8 Special Utility Features The data chart below gives you a quick way to identify which version of software your instrument is currently running. It lists the version number of the MAIN system program only. If you wish more comprehensive information, it can be obtained on the website at www.hammondorganco.com under Downloads - System Software.
Need help?
Do you have a question about the Sk 1 and is the answer not in the manual?
Questions and answers