Zones; Uwhat Is Displayed On The Upper Left; Uinternal Zone; Uexternal Zone - Hammond Sk1 Manual

108
To control external MIDI equipment, ranges on the keyboard of
this instrument are assigned.
e range of the built-in sound engine on this keyboard (called
"Internal Zone") is set at the same time. You can use each sepa-
rately on a single manual keyboard.
Each MIDI keyboard connected to the MIDI IN jack can control
the external MIDI equipment with the external zone.
❼ ❽
❶ ❷ ❸
SK1's

uWHAT IS DISPLAYED ON THE UPPER LEFT?

On the upper left of the Zone mode, the Zone to be operated
now is displayed.
INT:
Internal zone
XZn: External zone (#n)

uINTERNAL ZONE

❶ MANUAL BASS - MODE
is is for setting the how the Manual Bass (P. 33) works.
LOW: Sounds on lowest note if a chord is played.
CHRD: Sounds suitable bass note if a chord is played on Lower part.
POLY: Sounds the chord if a chord played.
❷ MANUAL BASS - LIMIT
Sets the upper limit note for the Manual Bass function.
❸ SPLIT POINT (on SK1 only)
Sets the upper limit note for the Lower part when using the
split function (P. 33).
❸ LOWER to PEDAL (on SK2 only)
Sets the upper limit note for the 'Lower to Pedal' coupler (P. 34).
❹ OCTAVE - UPPER
Sets the octave of the Upper part. It is linked with the [OC-
TAVE UP], [OCTAVE DOWN] buttons on the top panel.
❺ OCTAVE - LOWER on SPLIT (on SK1 only)
is is for setting the octave of the Lower part.
works on splitted Lower division of internal keyboard.
❻ OCTAVE - LOWER on REAL
is is for setting the octave of the Lower part.
works on expanded Lower keyboard (SK1) and Lower key-
board (SK2).
[OCTAVE LOWER] button on the top panel adjusts #5 or #6
with select automatically.
HA<O> Sk1 / Sk2 Owner's Manual

ZONES

ey are called "External Zones".
❾ ❿ ⓫
❹ ❺
is parameter
is parameter
To locate this mode:
MENU/
EXIT
See "Function mode" (P. 68) for operation details.
⓬ ⓭
❻ ❶ ❷
SK2's

uEXTERNAL ZONE

❻ SWITCH
Sets whether or not to send the MIDI message in this zone.
❼ MIDI CHANNEL
Sets the MIDI send channel 1 to 16 of this zone.
❽ KEYBOARD ALLOCATE
Sets which keyboard to allocate this zone.
Set to the UPPER if it is only the SK1.
If on SK2 or there is an expanded keyboard, you can control
the external zone using the Lower keyboard or the Pedalboard.
In this time, set at LOWER or PEDAL.
Set at OFF if an external synthesizer is connected, to change
the Program or volume only, and no sending the note (playing)
messages.
❾ ZONE - LOW
❿ ZONE - HIGH
Sets the keyboard range for playing this zone.
Set the lower limit with LO and the upper limit with HI.
NOTE: 9 and 10 can also be set by playing the desired note on the
keyboard with pressing the [RECORD] button.
⓫ PROGRAM - BANK MSB
⓬ PROGRAM - BANK LSB
⓭ PROGRAM - PROGRAM CHANGE
Sets Bank Select and the Program Change to send to this zone.
Generally, switching the tone of an external synthesizer or sam-
pler is set by changing the Bank Select and the Program Change.
Please consult the owners manual of your MIDI equipment to
obtain the proper settings for Bank and Program change.
You can select the Bank MSB and LSB at 0 to 127, the Program
Change at 1 to 128.
⓮ ⓯ ⓰
❸ ❹
ENTER
⓱ ⓲
❻