Unpacking The Server; Installing The Floorstand Model - Fujitsu PRIMERGY TX300 S4 Operating Manual

Unpacking the server

4.1 Unpacking the server
V
CAUTION!
Follow the safety instructions in the
chapter.
The server must always be lifted or carried by at least two people.
Do not unpack the server until it is at its installation location.
Ê Transport the server to the place where you want to set it up.
Ê Unpack all individual parts.
Keep the original packaging in case you want to transport the server again.
Ê Check the delivery for any damage during transport.
Ê Check whether the items delivered match the details on the delivery note.
The product name and serial number of the product can be found on the identi-
fication rating plate.
Ê Notify your supplier immediately should you discover that the items delivered
do not correspond to the delivery note.
4.2

Installing the floorstand model

I
If you are not installing a PRIMERGY TX300 S4 floorstand model, skip
this section and continue reading at section
model" on page
V
CAUTION!
Please note the safety instructions in
page 25.
Ê Transport the server to the place where you want to set it up.
Ê Unpack the server (see
40
43.
"Unpacking the server" on page
Operating manual
Hardware installation
"Important information" on page 25
"Installing/removing the rack
chapter "Important information" on
40).
TX300 S4