Fujitsu PRIMERGY TX300 S4 Operating Manual page 53

Hardware installation
Fitting the articulated cable guide (cable management)
V
CAUTION!
In contrast to the instructions in the Technical Manual for the 19" (Classic)
Rack the articulated cable guide is only secured to the support upright -
not to the server.
Ê To secure the articulated cable guide, place two spring nuts in the groove in
the rear right support upright. The installation height shall correspond to the
height of the connecting cables on the server.
Figure 8: Fitting the articulated cable guide
Ê Secure the articulated cable guide to the rear right support upright with two
fixing screws.
TX300 S4
Installing/removing the rack model
Operating manual 53